cutless bearing

Status
Not open for further replies.
G

gary8041

.
Jun 25, 2004
36
- - vermont
I have to replace my cutless bearing. Does any one have any experence with a bearing remover made by strut pro. It seems like it presses out the bearing with removing any thing but the prop.looking for any feed back i can get.Gary
 
S

Steve Dion

.
Dec 2, 1999
15,184
Hunter Vision-36 Rio Vista, CA.
Have a yard do it.

Gary: A cutlass replacement is usually done about once every 10 years. Do yourself a favor and have the yard do it. It will cost about $150 and it will be done.
 
P

patrick

.
Jun 7, 2004
944
Birch Bay Washington
It is not rocket science

and not that hard to do. Directions have been previously posted here. It might be a good idea to pull the shaft even if you do not have to do that for this maintenance issue. Check the shaft for corrosion under the bearing. Check your woodruf keys at the same time or maybe just replace them anyway.
 
Status
Not open for further replies.

Top Bottom