CS30 Potty Replacement

[2 OLD PIRATES]

Hi all ....... having a great summer I hope!!!

Anyone here who has a CS30 and has replaced a Head could you possibly give me some feed back about how you went about it. I just removed a Wilcox and found that there is no way to get under the Head to put nuts & washers on your bolts. Is the underneath structure a metal or wood plate that the bolt screw into. When removing them they came out with quite a bit of difficulty. Any feed back would be appreciated.

Cheers
Irish Rogue

 

[Stu Jackson]

They are LAG bolts, they do not have any washers or nuts below them. Why? 'Cuz even the factory couldn't get their hands under there either!

Here's our head replacement. I suggest a Raritan PHII or PHB or get the LBA pump and use your old bowl, available right here on this website store (sorry, I didn't!). Support Phil and the gang.

http://c34.org/bbs/index.php/topic,3797.0.html

 

[2 OLD PIRATES]

Hi Stu ...... the bolts are 2 inch stainless steel machine bolts. That is what is throwing for a loop!!! That is what leads me to think that there is metal below.

Cheers
Irish Rogue