The fixed center binnacle/console/table in the cockpit has a curved tube of 1/2" SS "handrail" that is bolted to the top of the binnacle. This bar has come loose and the bolts inside the binnacle need to be tightened but are deeply and tightly seated in the fiberglass mold. Looks like it requires a very thin socket that will fit a large nut - approx 3/4", maybe even 1 inch.
Does anyone knows and can recommend the right socket measurements and tools needed to tighten that nut and secure the handrail?
Does anyone knows and can recommend the right socket measurements and tools needed to tighten that nut and secure the handrail?