Blisters on 37cutter

Status
Not open for further replies.
B

Bob Tilley

I'm looking at hunter 37 cutters. Does anyone have expierence with blister on this model and what they did to aliviate the problem.
 
Jun 2, 2004
5,802
Hunter 37-cutter, '79 41 23' 30"N 82 33' 20"W--------Huron, OH
My '79 had some.

My 1979 had about 50 to 75 cosmetic blisters. These were about the size of a pencil eraser and contained no moisture. They were not even detectable I until I decided to take off all the anti-fouling and barrier coat her. Still I dremeled and filled them before applying five coats of Interlux 2000E. The consensus when I was doing this work in April 2000 was that I was wasting time and money. The thinking was it would not worsen. But I wanted peace of mind. And it is a fresh water boat that I plan to eventually sail in salt water. I have been watching this board and reading everything about the H37C since 1998. I have seen very little written about blister problems on any of the Cherubinis.
 
B

Bob Tilley

Thank you

Scot and Ed; Thanks for your replies, much appriciated. I have a Newport with some minor blistering and wanted to know if this is a problem with the 37 cutters which I'm interested in moving up to. Apparrantly not a major problem. Thanks.
 
May 6, 2004
916
Hunter 37C Seattle
Bob, I'll be Pt. Hudson marina

saturday overnighting. Stop on by if you want to check out Celebration, blue on white with killer stern rail seats. It might be sort of a raft up zoo but if you can find the boat, give a shout.
 
Status
Not open for further replies.