Anyone use Yoga Mats for cockpit cushions?

Sep 30, 2025
180
Catalina 22 Davis Hollow - Lake Arthur
Knowing the cost of cushions, I'm wondering if the thick (1"+) yoga mats would work as a simple, lasting, and cheap solution for cockpit cushions?

If it works, are there special types of foam to choose that will not let water in...or are they all basically waterproof?

I've been using a yoga mat (thick one) in my cockpit for a few days now and it seems like it would work great. I'm wondering why though I've never seen this or heard it talked about? Am I missing something...

Also curious what is best simple way to cut a yoga mat down that's leaves a nice edge?

Cool beans'
 
Jan 11, 2014
13,990
Sabre 362 113 Fair Haven, NY
There are 2 basic types of foam, open cell and closed cell. Open cell foams are like sponges, the bubbles that form the foam are broken and water can pass through the foam. Closed cell are the opposite, the cells are closed and they are more or less impervious to water passage. Within the these two types there are dozens of variations.

The easiest way to cut foam is with an electric knife or a fancy foam cutter that Sailrite.com sells. Sailrite also has good technical information on various foams used for seating and sleeping.
 
  • Like
Likes: JBP-PA
Mar 26, 2011
3,953
Corsair F-24 MK I Deale, MD
One-inch closed cell foam is best cut with a sharp razor knife. The "foam cutters" are for thicker foam and open cell foam.

Sure, why not. I've made cushions out of closed cell foam pool floats. They can be anchored in place by gluing loops of webbing (Skia 291, at least 4-inch tail) to the underside and clipping to pad eyes with mini carabiners.

cutting foam
 

dLj

.
Mar 23, 2017
5,063
Belliure 41 Back in the Chesapeake
I've been using yoga mats on my boat for years. Closed cell is the way to go in my opinion. Cutting them - I use a straight edge that can push the foam down so it's compressed then cut with a razor. Works well enough for what I need. Depending upon how thick the foam is I'll use a thicker straight edge to be able to compress the foam better. You'll want a nice compressed edge to cut.

dj

p.s. when cutting, I take a piece of plywood and put a layer of cardboard on top, then lay the foam on, compress and cut.
 
Last edited:

MFD

.
Jun 23, 2016
278
Hunter 41DS Pacific NW USA
I use them for carpet inside in the winter - keeps the toes warm and they are soft and grippy even with socks.
This year I have also been using one in the cockpit off and on to sit on.
Not sure how they hold up to UV long term.
Mine are pretty thin, maybe 1/2", and were easy to trim with a carpet knife.
 
  • Like
Likes: jssailem

colemj

.
Jul 13, 2004
1,052
Dolphin Catamaran Dolphin 460 Mystic, CT
On a previous boat, we used thicker closed cell pool floats. One was enough for the two cockpit benches. It was meant to be temporary, and covered with canvas, but we found the coating on it fine, and the foam to last a long time. Never did replace with "proper" cushions.

Like this: Amazon.com

Mark
 
Sep 30, 2025
180
Catalina 22 Davis Hollow - Lake Arthur
On a previous boat, we used thicker closed cell pool floats. One was enough for the two cockpit benches. It was meant to be temporary, and covered with canvas, but we found the coating on it fine, and the foam to last a long time. Never did replace with "proper" cushions.

Like this: Amazon.com

Mark
Those look nice. Little pricey though... Know where I can just buy plain closed cell foam on its own?

Also what kind of "canvas" did you cover them in? Just regular artists canvas or special outdoor canvas material...or like the canvas drop cloths sold for painting walls (this last one was an idea of mine but probably wouldn't work?) ? I'm trying to do this as simple and as affordable as possible. Function is my only real concern. I'm
good with my hands so I'm willing to spend the time to make cheap materials look pretty good (hopefully, lol)
 

dLj

.
Mar 23, 2017
5,063
Belliure 41 Back in the Chesapeake
Those look nice. Little pricey though... Know where I can just buy plain closed cell foam on its own?

Also what kind of "canvas" did you cover them in? Just regular artists canvas or special outdoor canvas material...or like the canvas drop cloths sold for painting walls (this last one was an idea of mine but probably wouldn't work?) ? I'm trying to do this as simple and as affordable as possible. Function is my only real concern. I'm
good with my hands so I'm willing to spend the time to make cheap materials look pretty good (hopefully, lol)
Here's a pretty cheap yoga mat off Amazon.



It's a closed cell foam. They are about $16 each. Only 1/2" thick but you can get some contact cement and put two together to get close to 1" or 3 if you'd like. Then if you put an inexpensive cover on them nobody would even know...

Lot's of ways to skin the cat...

dj