Hi All. I have a 1984 Hunter 34 that is being completely refit. In the process a few leaks have been found that need dealt with prior to finishing the refit. SO... I have 14 windows & ports, 4 hatches and the 72 screws in the tracks that need removed and rebed. I realize that some are probably not leaking, but might as well deal with it right. I know it is going to be a pain in the @$%. Can anyone that has an older Hunter and has done this offer up a bit of advise. I know some will say to replace the windows, but with the refit, it is something that may have to wait till next season to save up for.
Also, MAINESAIL, I am "Guessing"...Silicone on the plastic ports and Butyl on the metal windows? If so, will order....
As for hatches, the lexan will probably need removed and rebed... suggestions on materials here would be helpful..
Thank you in advance to all who reply.....
Brian
Also, MAINESAIL, I am "Guessing"...Silicone on the plastic ports and Butyl on the metal windows? If so, will order....
As for hatches, the lexan will probably need removed and rebed... suggestions on materials here would be helpful..
Thank you in advance to all who reply.....
Brian