Hi all:
I have attached a photo of the acrylic galley sink back splash from Maxine. Over the years the acrylic has become partially clouded. The clouded area is forward of the double sink. The acrylic remains clear toward each end of the back splash. So I need some advice on an effective way to restore the clarity of the acrylic. I have researched on YouTube but what I have found so far hasn't been exactly my problem. The clouding seems to be almost crystalline and nothing I have used so far has had the desired affect. I tried Turtle Wax headlight restorer. This shined the clear sections but not the clouded areas. Next I tried 2000 grit wet sand paper. No effect. Then I tried buffing with the treatment from the Turtle Wax kit but again with no effect.
I'd appreciate ideas on where to go next, hopefully with better results.
Thanks
Rick
I have attached a photo of the acrylic galley sink back splash from Maxine. Over the years the acrylic has become partially clouded. The clouded area is forward of the double sink. The acrylic remains clear toward each end of the back splash. So I need some advice on an effective way to restore the clarity of the acrylic. I have researched on YouTube but what I have found so far hasn't been exactly my problem. The clouding seems to be almost crystalline and nothing I have used so far has had the desired affect. I tried Turtle Wax headlight restorer. This shined the clear sections but not the clouded areas. Next I tried 2000 grit wet sand paper. No effect. Then I tried buffing with the treatment from the Turtle Wax kit but again with no effect.
I'd appreciate ideas on where to go next, hopefully with better results.
Thanks
Rick
Attachments
-
99.6 KB Views: 164