The boat is pulled for a bottom job and to document the 33 prop shaft strut and the modified rudder - here are pictures of both parts which are normally under water. The strut was made by Dahmer Marine Hardware Company - Part Number H-33 (new part number 2005). It is still in their product listing. This is their site:
http://www.dahmermarine.com/
Next is the squared off rudder which was shortened by 7" on the bottom and widened by 7" on the tail edge. This rudder steers the boat very well and backs up well too.
http://www.dahmermarine.com/
Next is the squared off rudder which was shortened by 7" on the bottom and widened by 7" on the tail edge. This rudder steers the boat very well and backs up well too.
Attachments
-
53.7 KB Views: 342
-
68.6 KB Views: 332
-
49.5 KB Views: 388
-
57.8 KB Views: 343