Whats a good filler product, to fill in some gouges and scrapes on the topsides beofre I start to paint. Also, whats the best place to buy Awlgrip from (price wise). West Marine seemed alittle high. Thanks Ryan
2 questions about topsides
- Thread starter new2sail23
- Start date
- Status
Fillers and Awlgrip
I would suggest West system epoxy and fillers for the filling chores. Then check with Jamestown Distributors for the paint. Check the link for the uses of epoxy. Great stuff.
I would suggest West system epoxy and fillers for the filling chores. Then check with Jamestown Distributors for the paint. Check the link for the uses of epoxy. Great stuff.
Topsides repair
It's not always necessary to use West epoxy when other materials will accomplish the same end. I use West for a number of different repairs, but will also use 3M Premium Marine Filler, or Interlux Water-tite for filling gouges, scratches etc. The 3M is a vinylester filler and the Water-tite is an epoxy filler. They mix and apply easily, dry much quicker than West, sand easy, and allow you to progress faster on a repair. They're also cheaper to purchase a small amount. Good luck with your repairs.
It's not always necessary to use West epoxy when other materials will accomplish the same end. I use West for a number of different repairs, but will also use 3M Premium Marine Filler, or Interlux Water-tite for filling gouges, scratches etc. The 3M is a vinylester filler and the Water-tite is an epoxy filler. They mix and apply easily, dry much quicker than West, sand easy, and allow you to progress faster on a repair. They're also cheaper to purchase a small amount. Good luck with your repairs.
- Status