Hi Dave,Check boarding ladder bolts. Mine leaked there and I tightened them and it stopped for a while. I still get some. If it were the holding tank drain I think you would know it. Could also be where the rub rail bolts are. Need to see if it is fresh water or salt. Mine is fresh. I think mine could be coming from where the screws that hold the plate where you stand at the wheel go through. I need to seal those up.
Man, been almost 10yrs. I really can't remember, I think I had toget down as far as I could and use some extensions. I remember we had taken the ladder off as it was a PIA to get aroundHi Dave,
My name is Tom. We have something in common as I’m the new owner of Up 2 No Good! I have a lot of questions for you as one of the previous owners, but one specific one today. I was down checking the boat yesterday before we get this next snow storm and saw that the pins for the ladder bolts have rusted through. I need to remove the ladder to fix and was wondering how you reached the bolts on the port side, the propane locker on that side is closed off.
Thanks,
Tom