1994 29.5 aft locker

Dec 14, 2009
37
Hunter 29.5 Buffalo
I have a locker on the starboard side of the swim platform that seems to get water in it, not sure where it comes from. Anyone else have this issue?
 

Sailm8

.
Feb 21, 2008
1,751
Hunter 29.5 Punta Gorda
I have the same leak and think it might be the holding tank plumbing. I have a macerator pump and a line to a thru hull in that compartment. Something is leaking and I haven't been able to find it yet.
 
Jan 22, 2008
321
Hunter 29.5 Gloucester, VA
Check boarding ladder bolts. Mine leaked there and I tightened them and it stopped for a while. I still get some. If it were the holding tank drain I think you would know it. Could also be where the rub rail bolts are. Need to see if it is fresh water or salt. Mine is fresh. I think mine could be coming from where the screws that hold the plate where you stand at the wheel go through. I need to seal those up.
 
Sep 4, 2025
1
J-Boat J24 Bristol
Check boarding ladder bolts. Mine leaked there and I tightened them and it stopped for a while. I still get some. If it were the holding tank drain I think you would know it. Could also be where the rub rail bolts are. Need to see if it is fresh water or salt. Mine is fresh. I think mine could be coming from where the screws that hold the plate where you stand at the wheel go through. I need to seal those up.
Hi Dave,
My name is Tom. We have something in common as I’m the new owner of Up 2 No Good! I have a lot of questions for you as one of the previous owners, but one specific one today. I was down checking the boat yesterday before we get this next snow storm and saw that the pins for the ladder bolts have rusted through. I need to remove the ladder to fix and was wondering how you reached the bolts on the port side, the propane locker on that side is closed off.

Thanks,
Tom
 
Jan 22, 2008
321
Hunter 29.5 Gloucester, VA
Hi Dave,
My name is Tom. We have something in common as I’m the new owner of Up 2 No Good! I have a lot of questions for you as one of the previous owners, but one specific one today. I was down checking the boat yesterday before we get this next snow storm and saw that the pins for the ladder bolts have rusted through. I need to remove the ladder to fix and was wondering how you reached the bolts on the port side, the propane locker on that side is closed off.

Thanks,
Tom
Man, been almost 10yrs. I really can't remember, I think I had toget down as far as I could and use some extensions. I remember we had taken the ladder off as it was a PIA to get around