The boat never had a bilge pump installed. I found a purposely made passage between the bilge and the starboard berth bulkhead for a hose but it seems restricted as I could barely snake a tape measure through it. Has anyone done a fresh install, and what is the hose OD that I should be able to get through it?
Looking around the yard at other boats, it looks like most thru hulls are about a foot above the waterline on the transom. Does that seem correct for the 25?
Also, I replaced the thru hull for the head sink. It is at waterline and has no seacock. Is there any problem with backflow while heeling?
Looking around the yard at other boats, it looks like most thru hulls are about a foot above the waterline on the transom. Does that seem correct for the 25?
Also, I replaced the thru hull for the head sink. It is at waterline and has no seacock. Is there any problem with backflow while heeling?