transom

Going to put a new outboard on a 26.5 hunter. This is the state of the mount from both sides of the transom. Epoxy reinforce the top bolts and add a backing plate?

Monoceros Hunter 37c hull#52 1979 First image, the gear is just sitting there for the photo. This gear and bracket around the rudder post seems removable, would these parts be valuable to anyone? We are mounting an Aries Windvane and will not need this gear for autopilot, I should just remove...

I have a 1974 Irwin 28 with a Volvo Penta MB10A gas inboard which was on its way-out last season. I want to install an outboard on the transom for the coming season. The transom is pretty much vertical. I have done some research and found several pictures of Irwin 28's with outboard engines...

Hi all, we have an O'day 23 Mk II. The transom was rotted, and we've rebuilt it. It was a rough job and I want to make sure the outboard motor mount is properly reattached. We have a Garelick outboard motor mount with wedges that we're going to rebuilt/reuse, but with the wedges the transom and...

Hello, I am still relatively new here, and I have done a lot of searching online and on this forum, but I am still wondering about one thing. I am about to tackle replacing some rotten core in my transom. My 1988 H26.5 has a small outboard motor mount and there must've been water...

We are looking for input on a transom mounted arch davit system installed aftermarket made by Beneteau. What has been your experience with the system? How did you reinforce the transom for aftermarket installation?

Any Hunter 42 Passage owners experience water in the aft transom lockers? I had to motor over to a beach on Saturday and noticed when under full power the transom was very low in the water (8.4 knots). Upon arrival at the beach I noticed about a foot of water in transom lockers. I have also...