h23.5

Took my Centerboard off to replace the uphaul line and noticed the pin bearing was quite worn. See pics. Even the hole in the fiberglass is enlarged over 1" (factory dimension) by like an 1/8". I'm thinking of replacing the plastic bearing with a bronze bearing on each side of the centerboard...

Need to replace the Centerboard up haul line and I can not get the large bolt that holds the Centerboard Bracket in place. This is the one in the cabin next to the mast compression pole. Using a 14" breaker bar and it only moves like 15 degrees and then freezes up as if I were tightening it...

Hi everyone. I'm looking for information on what the original cooler or ice chest that is supposed to be under the port side bench by the galley should be on the H23.5. There is a depression in the floor to keep it in place while heeling over and it is supposed to be high enough that once the...

So when I opened up the two screws on my 2-cycle, '94 Johnson 9.9 long shaft to drain the gear lube, there it was - gone. (Cue harp music) ...So it was a very hot, windless day, and the last sail of our first year with our H23.5. I had just adjusted the engine's mixture screw to keep the...