delamination

I had some delamination in my bilge (at the lowest point next to bulk head) so chipped away the bad areas. I’ve been waiting for the area to dry out but keep finding small amounts of water (1 tsp per 6 hours?) coming from the stringer just aft of the bulkhead where I opened up the area. The...

looking for recommendations on repair material. i have removed the tabernacle fiberglass skin and wet core from my c&c27mkiii and found what was left of a piece of marine ply that was sandwiched between the skins under the mast step. do i use another piece of marine ply? stainless plate? or...

Has anyone had to remove or drop their rudder on a Hunter 42 passage? I just had my bottom blasted and was sanding and noticed water dripping from mine and have delamination on one side :( Hoping to get thru this year on Lake Michigan before deciding whether to either replace for the $4500 on...

Annual inspection revealed a soaking wet/rotted balsa core above the cabin. At this point, all hardware has been removed and initial cut has been made in the top of the cabin. The original hole will need to be enlarged to reveal more of the wet core and begin excavation. Epoxy and...

I've had a survey performed on my H380 that I'm selling and the surveyor stated that the entire rudder sounded dead when he was percussion sounding it with a hammer (I was not within him when he sounded the rudder). I seem to recall a few years ago that there was a topic on here regarding the...