Media

Navigation

Browse albums

Media comments

  • North Texas Sailor
    10003920_10152058444073992_320766486_n
    This is a beautiful galley
  • L
    SAM 0324
    Neat boat, this looks like one of the original Willard built Lancer 30s. You can tell from the swept back keel that is similar to the C&C Mk I...
  • A
    1975 o'day 22
    will be changing to led lights both mast and cabin along with nav lights. adding solar, adding bbq, rebedding all deck hardware and below water...
  • Monsterfish
    Looking forward to V-berth.
    Wow.....dream home!
  • D
    MacGregor 26s
    Das sind Teakleisten, die aufgeklebt, dann mit Schwarzer Masse ausgegossen und geschliffen wurden. Sieht immer noch aus wie neu.....

Media statistics

Albums
3,799
Uploaded media
22,708
Embedded media
19
Comments
425
Disk usage
2.2 GB
Whisker pole storage, port side.

Whisker pole storage, port side.

  • 0
  • 0
New mast cap not only had a nice rounded top, but also provides a couple additional attachment points

New mast cap not only had a nice rounded top, but also provides a couple additional attachment points

  • 0
  • 0
New Idasailor rudder installed

New Idasailor rudder installed

  • 0
  • 0
New Idasailor rudder installed with 1/4" yacht braid used for hoisting line

New Idasailor rudder installed with 1/4" yacht braid used for hoisting line

  • 0
  • 0
New Idasailor CB next to old

New Idasailor CB next to old

  • 0
  • 0
New Idasailor CB next to old one. Had to drill new hole for the hoisting line. Used 1/4" yacht braid instead of the old cable with nuts and bolt.

New Idasailor CB next to old one. Had to drill new hole for the hoisting line. Used 1/4" yacht braid instead of the old cable with nuts and bolt.

  • 0
  • 0
New Idasailor CB installed

New Idasailor CB installed

  • 0
  • 0
Mast support, made to fit nicely pinned in the tabernacle. I have since rounded the corners, prettied it up and stained it.

Mast support, made to fit nicely pinned in the tabernacle. I have since rounded the corners, prettied it up and stained it.

  • 0
  • 0
I use a PVC raingutter to provide support for CDI furler, fastened with ball bungies while trailering. I put the gutter on top, so water will not be able to sit inside.

I use a PVC raingutter to provide support for CDI furler, fastened with ball bungies while trailering. I put the gutter on top, so water will not be able to sit inside.

  • 0
  • 0
This flat cap was originally at the top of the mast. I moved it to the bottom to make the base stronger. Also keeps birds from building a nest in there, I had one once.

This flat cap was originally at the top of the mast. I moved it to the bottom to make the base stronger. Also keeps birds from building a nest in there, I had one once.

  • 0
  • 0
Routed the pipes hugging the wall, allows better storage.

Routed the pipes hugging the wall, allows better storage.

  • 0
  • 0
I did away with the OEM plastic tubing. Replaced it with PVC

I did away with the OEM plastic tubing. Replaced it with PVC

  • 0
  • 0
This is what the laz floor looks like installed. I have since made a wood floor. But this is a descent, easy, inexpensive option.

This is what the laz floor looks like installed. I have since made a wood floor. But this is a descent, easy, inexpensive option.

  • 0
  • 0
The laz floor made in two pieces, for easy insertion and removal.

The laz floor made in two pieces, for easy insertion and removal.

  • 0
  • 0
Laz floor. I wanted a floor to keep stuff out of any water in there. But I also wanted to be able to remove it if needed. This worked fairly well. I made it out of sched 40 pvc, real easy to do.

Laz floor. I wanted a floor to keep stuff out of any water in there. But I also wanted to be able to remove it if needed. This worked fairly well. I made it out of sched 40 pvc, real easy to do.

  • 0
  • 0
Laz floor just sits loose, not fastened, I like to be able to remove it if needed.

Laz floor just sits loose, not fastened, I like to be able to remove it if needed.

  • 0
  • 0
Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.

Laz floor, I made this from scrap wood. I'll re-do it with better wood and seal it.

  • 0
  • 0
The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.

The boards just lift out, leaving frame below. Access to the bilge pump or transducer is easy my removing only the middle board.

  • 0
  • 0
TP at the dock

TP at the dock

  • 0
  • 0
TP launch

TP launch

  • 0
  • 0
TP on travel lift

TP on travel lift

  • 0
  • 0
TP on stands

TP on stands

  • 0
  • 0
P1000360

P1000360

  • 0
  • 0
P1000363

P1000363

  • 0
  • 0
Top Bottom