Media

Navigation

Browse albums

Media comments

Media statistics

Albums
3,799
Uploaded media
22,708
Embedded media
19
Comments
425
Disk usage
2.2 GB
Had to twist this as well to get the crimp out of it and re-tightened the hose clamp.

Had to twist this as well to get the crimp out of it and re-tightened the hose clamp.

  • 0
  • 0
Saw the crimp in the pic after taking it so loosened the clamp and rotated the hose and re-tightened the clamp

Saw the crimp in the pic after taking it so loosened the clamp and rotated the hose and re-tightened the clamp

  • 0
  • 0
New Marelon valve with brass pushlocks and clear tubing (push locks not long enough for two hose clamps, no pressure here just a drain).

New Marelon valve with brass pushlocks and clear tubing (push locks not long enough for two hose clamps, no pressure here just a drain).

  • 0
  • 0
Original crappy gate valve

Original crappy gate valve

  • 0
  • 0
1981 HUNTER 22 081

1981 HUNTER 22 081

  • 0
  • 0
The interesting use of the bow stem reinforcing kit to secure the anchor rhode. After replacing the bow eye block, bow eye, and all for'ard fittings that will all be tidied up for sure...

The interesting use of the bow stem reinforcing kit to secure the anchor rhode. After replacing the bow eye block, bow eye, and all for'ard fittings that will all be tidied up for sure...

  • 0
  • 0
After stripping (much hard work) the wood was more uniform and ready to coat with Teka. That wonderful 2-part solution really brought the muck out of teh grains and presented a beautiful surface and look.

After stripping (much hard work) the wood was more uniform and ready to coat with Teka. That wonderful 2-part solution really brought the muck out of teh grains and presented a beautiful surface and look.

  • 0
  • 0
The teak coated with the stripping gu.

The teak coated with the stripping gu.

  • 0
  • 0
The old bow stem fitting. The original piece from Catalina was made of wood and had a single eye bolt for the trailer eye. The Stem Reinforcement kit had actually been used to secure the anchor rhode. That all was about to change (for the better !!)...

The old bow stem fitting. The original piece from Catalina was made of wood and had a single eye bolt for the trailer eye. The Stem Reinforcement kit had actually been used to secure the anchor rhode. That all was about to change (for the better !!)...

  • 0
  • 0
Look at the different colours, affected by yaers of sunlight, lack of upkeep, etc.

Look at the different colours, affected by yaers of sunlight, lack of upkeep, etc.

  • 0
  • 0
The old teak, out of the boat and about to be stripped...

The old teak, out of the boat and about to be stripped...

  • 0
  • 0
Port side

Port side

  • 0
  • 0
Bow end

Bow end

  • 0
  • 0
Stern Quarter, port side

Stern Quarter, port side

  • 0
  • 0
The junior crew posing before walking the plank !

The junior crew posing before walking the plank !

  • 0
  • 0
'Das Boot'

'Das Boot'

  • 0
  • 0
Ready to hit the road

Ready to hit the road

  • 0
  • 0
Vahevala @ dusk in Channel Islands marina, Oxnard, CA

Vahevala @ dusk in Channel Islands marina, Oxnard, CA

  • 0
  • 0
New aluminum trailer from ABTrailers of Van Nuys, CA

New aluminum trailer from ABTrailers of Van Nuys, CA

  • 0
  • 0
Heel 1

Heel 1

  • 0
  • 0
Nantucket!

Nantucket!

  • 0
  • 0
Ready for summer '12.

Ready for summer '12.

  • 0
  • 0
The water's that way!

The water's that way!

  • 0
  • 0
on the travel lift to sort out keel issues, 2011

on the travel lift to sort out keel issues, 2011

  • 0
  • 0
Top Bottom