Media

Navigation

Browse albums

Media comments

  • A
    1975 o'day 22
    will be changing to led lights both mast and cabin along with nav lights. adding solar, adding bbq, rebedding all deck hardware and below water...
  • Monsterfish
    Looking forward to V-berth.
    Wow.....dream home!
  • D
    MacGregor 26s
    Das sind Teakleisten, die aufgeklebt, dann mit Schwarzer Masse ausgegossen und geschliffen wurden. Sieht immer noch aus wie neu.....
  • P
    Marilee-Interior.jpg
    This interior is gorgeous! What type of boat is this in?
  • JohnScott
    DSCN8846
    CHILD LABOR

Media statistics

Albums
3,799
Uploaded media
22,708
Embedded media
19
Comments
425
Disk usage
2.2 GB
DSC00601

DSC00601

  • 0
  • 0
DSC00598

DSC00598

  • 0
  • 0
new trailer tires

new trailer tires

  • 0
  • 0
new cross sections

new cross sections

  • 0
  • 0
Trailer done

Trailer done

  • 0
  • 0
trailer almost done

trailer almost done

  • 0
  • 0
Lifted 3

Lifted 3

  • 0
  • 0
Lifted 2

Lifted 2

  • 0
  • 0
First Interlux2000e coat

First Interlux2000e coat

  • 0
  • 0
starboard fiberglas woork

starboard fiberglas woork

  • 0
  • 0
mast core fixed

mast core fixed

  • 0
  • 0
Bow Nav Lights Front

Bow Nav Lights Front

  • 0
  • 0
Chain Plate Sealing

Chain Plate Sealing

  • 0
  • 0
Scribed and cut the wall to fit and re-installed. I will add more pics of the cutain rods and curtains when we finish.

Scribed and cut the wall to fit and re-installed. I will add more pics of the cutain rods and curtains when we finish.

  • 0
  • 0
Screwed it in place to the 2 x 4 cleat and it rests nicely on the seat and the ledge.

Screwed it in place to the 2 x 4 cleat and it rests nicely on the seat and the ledge.

  • 0
  • 0
First a dry fit

First a dry fit

  • 0
  • 0
Installed a 2 x 4 though bolted to the v-berth with s.s. screws and lock nuts

Installed a 2 x 4 though bolted to the v-berth with s.s. screws and lock nuts

  • 0
  • 0
Assembled with exterior 1/4" plywood and hung. I shot two coats of white epoxy followed by two coats of polyurethane

Assembled with exterior 1/4" plywood and hung. I shot two coats of white epoxy followed by two coats of polyurethane

  • 0
  • 0
I assembled both legs onto a 2 x 6 using exterior screws and glue.

I assembled both legs onto a 2 x 6 using exterior screws and glue.

  • 0
  • 0
Starboard leg in place to check fit

Starboard leg in place to check fit

  • 0
  • 0
Measured out to cut the height

Measured out to cut the height

  • 0
  • 0
After the first two cuts

After the first two cuts

  • 0
  • 0
I transferred the height to the side walls using a 2x6 to keep the angle.

I transferred the height to the side walls using a 2x6 to keep the angle.

  • 0
  • 0
I scribed the 'leg' to match the different angles and cut it to fit.

I scribed the 'leg' to match the different angles and cut it to fit.

  • 0
  • 0
Top Bottom