Interior5 Interior pieces prior to paint. Notice long strips along the V-berth section. Instead of placing the new section over the 2" section left behind, I scabbed these pieces underneath cut the new section to fall into place.
Deck lifted exposing rotted core
DSCN8409 Where it all started, now finished.
DSCN8404 Interior nearing completion.
Interior5 Interior pieces prior to paint. Notice long strips along the V-berth section. Instead of placing the new section over the 2" section left behind, I scabbed these pieces underneath cut the new section to fall into place.
Cabin1209 V-berth "patterns". I cut the oval holes in these areas to acces space that would otherwise be inaccessible. I did this a few years ago in place, and in the replacement wood before installation.
Cabin3 Companionway view of stripped cabin.
Cabin1202 V-berth area. Notice the hole drilled on the forward vertical surface of the sole pan. This was glassed over, as was the aft hole. Water was retained, and at best would seep to where I could removed it, but caused the rot in the bulkheads adjacent.
Mark Major

Interior5 Interior pieces prior to paint. Notice long strips along the V-berth section. Instead of placing the new section over the 2" section left behind, I scabbed these pieces underneath cut the new section to fall into place.

There are no comments to display.

Media information

Album
Gunwale core replacement and subsequent wood replacement
Added by
Mark Major
Date added
View count
356
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
4514-1241838794-02901e949e0e3e52e99731546947e7c8.jpg
File size
33.5 KB
Dimensions
450px x 600px

Share this media

Top Bottom