Finishing the rub rail along the side.
Raising the mast and adjusting the rigging.
The lettering completed
We decided to buy vinyl letters rather than paint them on. It was a really good dicision for us!
Finishing the rub rail along the side.
I tried using a utility razor on an ned scrap piece and found that a hack saw cut the rub rail much better. I used some cardboard just to make sure the hacksay did not jerk off and scratch the paint. It did in fact jump on me and hit the cardboard. I lapped the pieces by 1/8" and then worked them together.
Bringing the rub rail around the corner of the stern took the most patience. I used a hair dryer to heat the rub rail and had to keep it on the corner much longer than when I heated the bow.
I decided to wait until the next day to do the last two sections of the rub rail but wanted to get a jump on getting the rubber insert in.
RECESS

Finishing the rub rail along the side.

There are no comments to display.

Media information

Album
Refitting O'Day 25
Added by
RECESS
Date added
View count
383
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
4689-1243114265-11c5ea956b76c9f906d8bd63eca5b295.jpg
File size
36.9 KB
Dimensions
579px x 600px

Share this media

Top Bottom