Bringing the rub rail around the corner of the stern took the most patience. I used a hair dryer to heat the rub rail and had to keep it on the corner much longer than when I heated the bow.
We decided to buy vinyl letters rather than paint them on. It was a really good dicision for us!
Finishing the rub rail along the side.
I tried using a utility razor on an ned scrap piece and found that a hack saw cut the rub rail much better. I used some cardboard just to make sure the hacksay did not jerk off and scratch the paint. It did in fact jump on me and hit the cardboard. I lapped the pieces by 1/8" and then worked them together.
Bringing the rub rail around the corner of the stern took the most patience. I used a hair dryer to heat the rub rail and had to keep it on the corner much longer than when I heated the bow.
I decided to wait until the next day to do the last two sections of the rub rail but wanted to get a jump on getting the rubber insert in.
The rub rail attachement went slow but the first 20 foot section went really well.
I used a hair dryer to heat the rub rail around the bow of the boat. I had to be patient, but it worked really well and did not heat the boat itself.
RECESS

Bringing the rub rail around the corner of the stern took the most patience. I used a hair dryer to heat the rub rail and had to keep it on the corner much longer than when I heated the bow.

There are no comments to display.

Media information

Album
Refitting O'Day 25
Added by
RECESS
Date added
View count
358
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Filename
4687-1243114265-08291012f0142d7e7a484227ab2fc247.jpg
File size
31.8 KB
Dimensions
600px x 450px

Share this media

Top Bottom