Need Yanmar 3qm30h Fresh Water Pump
- Thread starter capjules
- Start date
- Status
if it is rebuild able look for the Flying Dutchman on the web...i had hime rebuild mine about a year ago...he is Oregon...and his name is Tony Cordelis or some thing like that ....he had the parts in stock to fix mine and was reasonable on priceing ...the pump is made by AISN......sorta like delco is to GM......hope this helps.......
regards
woody
Give these guys a shout.. they are your Yanmar distributor.. We recently rebuilt one using Yanmar parts and it was not expensive to do..
2801 Anvil Street North
33710 St. Petersburg (United States, Florida) T 727.522.9471
F 727.527.7013
I www.mastry.com
E sales@mastry.com
2801 Anvil Street North
33710 St. Petersburg (United States, Florida) T 727.522.9471
F 727.527.7013
I www.mastry.com
E sales@mastry.com
i am not Claude but yes you do ....the guy in Oregon rebuilt mine for about $80.00 including shipping .....and all the parts are new.....give him a call and talk to him it seems to me to be the best solution ....the dang parts from Yanmar cost that much ...then you still have to take a chance on busting the housing when you press the old shaft out and the new shaft in ....
regards
woody
I rebuilt mine using a large vice and a socket from my socket set to press out and in the rubber bushing. Rebuilt took about an hour and cost about 60 for a rebuild kit from my local yanmar distributor. There is no real "kit". The distributor just told me he used the parts diagram and gave all of the parts.
Here's how I did our Oberdorfer pump rebuild, may not be the same guts as your pump, but the concept should be the same: http://c34.org/bbs/index.php/topic,6766.0.html
Maine Sail has a good description on his website, too.
Maine Sail has a good description on his website, too.
Woody,
I can't locate this person you speak of, there's a million listings for flying dutchman on the web and the only flying dutchman on this site is in maryland. do you have any more info ?
Thanks,
Jules
- Status