Cockpit Tables

Status
Not open for further replies.

Mac

.
Jun 7, 2006
436
MacGregor 25 KEUKA lake NY
Gas locker table

Here is the one I built out of scrap flooring pieces. Top lifts off to get to the gas tank. I drilled some holes in it for drinks in the top self. Works great.
 

Attachments

caguy

.
Sep 22, 2006
4,004
Catalina, Luger C-27, Adventure 30 Marina del Rey
I just whipped this one out tonight. the table is the easy part(so long as you have UV resistant plastic lying around) It's figuring out a way to mount it that will get you.
Most RV stores have a single leg support available. First pict.

Volkswagen does it this way. Second pict.

BTW, Nice job!
 

Attachments

Sep 25, 2008
2,288
C30 Event Horizon Port Aransas
I am going to mount this table to the rail on the helm pedastal. I want it to flip up like everyone's does but I also want it to spin. It seems to be the perfect size for my wife and I to eat at but only if it is spun to where it is at it's widest.
I know most people buy/build the table with the leafs that fold out, but the hardware to do that is more than I have to spend on the table budget.
I will try to come up with something clever. I have to think on it a while though.
 
Sep 25, 2008
2,288
C30 Event Horizon Port Aransas
Most RV stores have a single leg support available. First pict.

Volkswagen does it this way. Second pict.

BTW, Nice job!
Thanks. A table saw, and a router with some roundover bits goes a long way to making plastic come out looking nice.
Ducati hasn't gotten back to us, maybe he found what he was looking for.
 
Dec 29, 2009
51
Seidelman S-37 Mobile
most Rv Stores Have A Single Leg Support Available. First Pict.

Volkswagen Does It This Way. Second Pict.

Btw, Nice Job!
Caguy, I See You Go To The Rv Stores. I Have A Question For You. My Fiance And I Have An Rv And A Vw Too. We Are Looking For A Small Folding Table That We Can Use When We Travel To Sit In Front Of The Couch Etc, Etc. Any Ideas Where We Might Find One. We Are Planning A Trip Out West Very Soon. Thanks, Abby
 
Sep 25, 2008
2,288
C30 Event Horizon Port Aransas
This is the best I could come up with. I made some clamps to hold it to the pedastal gaurd. They have pins in them that it will pivot on. The black piece of plastic has a circle in a circle to allow it to spin and the 3 layers are bolted all the way through.
Now I just have to come up with something better than a paint stick to hold it up.
 

Attachments

Status
Not open for further replies.