Hood Stoway In-Mast Furling Manuals

[Val B]

Good afternoon all, I purchased a Krogen38 3yrs ago with a Hood Stoway In-Mast Furling System. It's a manual system to a continuous line furling winch in the cockpit, which has been flawless except one bind last year. Well the bind happened again, and after a little in-out massaging plastic parts were found on deck ;/ and I was unable to cure the
bind.
I'm looking for any user info or manuals that may be had.
Thanks in advance,
Val

 

[dlochner]

Have you searched for the manual on online? Or contacted Hood Systems, they are owned by Pompanette.

 

[Val B]

Have you searched for the manual on online? Or contacted Hood Systems, they are owned by Pompanette.

Yes, with basically no luck. Pompanette does not even acknowledge their existence, or reference any legacy system not in production. Waiting for a reply back from a rigger in Maine who bought the original plans. Hood Stoway and headstay furlers

 

[Project_Mayhem]

Guarhaugher might be able to fabricate a new part if the rigger doesn't have any stock. If they can't help, PM me. I might consider designing and 3D printing it

 

[UpperPintle]

I have a manual system, but no continuous line (just crank at the mast). Attached are documents I found that might help you.

 

[Val B]

I have a manual system, but no continuous line (just crank at the mast). Attached are documents I found that might help you.

Thank you very much, I did secure another copy. It was good to see they are much the same, as I was concerned with different variations throughout production.
I appreciate your effort and assure you I will continue to assist other product owners as well.
Thanks again,
Val

 

[UpperPintle]

FYI: Here is info on the upper bearing assembly if you ever need to replace it. This is for the "A" Type luff rod. See page 12 of my previously attached "Manual.pdf"

Hood Stoway In-Mast Furler: Upper Bearing

Hood Stoway In-Mast Furler: Upper Bearing

pearson365.com