The N202M-16 water pump on my 25XPBC engine is starting to leak. I've ordered a new pump, a kit to rebuild the old one (keep as a spare, #11691), and two gaskets (just in case, #298485). The current fittings are looking a little corroded and I'm thinking of replacing them at the same time. I know bronze is the preferred metal, but are there any disadvantage with using stainless, or plastic (PVC or poly)? Also, does anyone remember the barbed hose size? 5/8"?
I spent an hour going through all the threads on the water pump here. Lots of real good info. Thanks to all who have shared.
I spent an hour going through all the threads on the water pump here. Lots of real good info. Thanks to all who have shared.