Engine Blower

[Newport Bob]

Hope this helps, from the Bene parts link


http://spareparts.beneteauusa.com/c...am=4&repere=13&CodeVersion=STD &variante=000

 

[bwasileski]

This is helpful.
Thanks.


Bryan

Hope this helps, from the Bene parts link
http://spareparts.beneteauusa.com/c...am=4&repere=13&CodeVersion=STD &variante=000

 

[bwasileski]

Thanks again. Got it swapped out the other day. When I saw the blower before unit it just looked like a mount for running the 3" corrugated tubing through to keep it from flopping around. The wires were tucked up underneath it so I didn't seem them. Turns out the blower started working when I got it off and shook it a little - like it was stuck. It spun for a little bit then stopped again. Tried that a few times but there was nothing obvious causing it to stick so I just went ahead and replaced it. It was time.

This is helpful.
Thanks.


Bryan

 

[Captn TJ]

Bryan

Thanks for closing the loop with us on this. I had to replace mine about three years after I purchased my 423 (new) so I feel your (back) pain