Cherubini 37, Stove Cavity

[JHoward]

We are not going to replace the broken Kenyen kerosene stove and instead will use the cavity for a storage system. Since my boat is 3-1/2 hours away from my home, could somebody give me the h x w x d dimensions of the cabinet?

 

[Johnb]

I am considering that space for a fridge, with gimbaled stove top above it.

From left to right 22.25 inches
Front to back at the bottom 18/5" (the top is deeper due to hull slope)
Bottom top level with the counter top 21"

 

[JHoward]

What is the height of the space?

 

[Jim Legere]

Bottom top level with the counter top 21"

I am not able to get to the boat, but I measured the Kenyon stove I have in the garage and I imagine John's measurement is spot-on.

 

[JHoward]

Sorry to hear - I am installing a metal frame unit with drawers and need that last height dimension to make my project; http://www.containerstore.com/shop/elfa/components/elfaDrawersAccessories?N=80348

Thanks for your help - so far.

 

[frankies56]

Hello just giving my two cents in I am not at my boat . but I removed the stove to and installed some metal shelfs like a dishwasher that slide out for pots and pans, and then made cabinet doors with louvers to cover home depot stuff it was pretty easy. I hope this helps going to boat now I will give you the size when I get back. my best Frank

 

[Benny17441]

Height. From where to where?

 

[JHoward]

Dimension to top of counter top.

 

[frankies56]

We are not going to replace the broken Kenyen kerosene stove and instead will use the cavity for a storage system. Since my boat is 3-1/2 hours away from my home, could somebody give me the h x w x d dimensions of the cabinet?

23 w x 19 h x18 1/2 depth at bottom, 23 depth at top hope that helps

 

[JHoward]

The 19" h helps a lot, thanks all.

 

[Johnb]

Note that the aperture in the plywood facing is smaller than the dimensions of the fiber glass molding. My measurements were for the molding.

How about some pictures of how people have used that space?