All Activity
-
Maine Sail replied to the thread The BMS Was Supposed to Protect my Batteries?.In a 4S config of 12V batts all BMS's must be 60V rated minimum.. The series aspect only serves to define the max safe BMS voltage... -
Maine Sail replied to the thread The BMS Was Supposed to Protect my Batteries?.Way past! This same issue applies to lead acid, which have zero built in protection, except they can explode and spew acid all over...
-
SSlipin Away replied to the thread Hunter 460 Companion way Sliding glass top removal..It is not that hard just remove the screws. On mine there was only caulk around screw holes. I had a problem with the dorado vents...
-
CMy windless jammed and its from the cap over the chain/rope Have depressed the button and applied force to loosen but to no avail...
-
BigEasy replied to the thread More Scams.I have used Greg’s Marine Wire for years. Good quality, price, & customer service. -
Good point. And the input seems consistent. Survey says... Two deck fills. Thanks, all. -
AaronD replied to the thread One freshwater deck fill or two?.Good point. And the input seems consistent. Survey says... Two deck fills. Thanks, all. -
Davidasailor26 replied to the thread The BMS Was Supposed to Protect my Batteries?.Yep, definitely 100V from a failed MPPT into a 12V battery, or paralleled group of them, would be bad news. My question is more about... -
Ddlochner replied to the thread One freshwater deck fill or two?.Keeping the tanks isolated is important so 2 fills are best. If there is one fill and it becomes contaminated, there is no way to fill...
-
DLast week, I tried to place an order with marinetechsupply dot com for some marine tinned wire. The price was quite good, but this...
-
Maine Sail replied to the thread The BMS Was Supposed to Protect my Batteries?.When the charge FETs cut off, even with four in parallel, you still have 85V AFE chips that control the typically 60V FETS. Batts in...
-
jaysweet replied to the thread West Marine Classic Dinghy.Maybe 6 years ago, I bought a Watertender 9.4 from WestMarine. It's a hard plastic dinghy with an inner and outer shell, presumably with... -
jaysweet replied to the thread More Scams.Last week, I tried to place an order with marinetechsupply dot com for some marine tinned wire. The price was quite good, but this...
-
Stu Jackson replied to the thread One freshwater deck fill or two?.I have two tanks with two separate fills. I never use one of the fills. Why? Because one tank easily drains into the other tank... -
kappykaplan replied to the thread One freshwater deck fill or two?.I have three water tanks on my boat. Each has a separate deck fill.
