All Activity
-
Oh hell yes.... I'm in love with this boat https://www.facebook.com/photo?fbid=28463595839920617&set=pcb.3958905621007880 -
Kings Gambit reacted to dlochner's post in the thread Charging a freezer / air conditioner with
Like.
Follow the adage, if it ain't broke don't fix it. -
jssailem replied to the thread Catalina Status.While there are mechanical issues, like wet decks and mold, I think the real challenge is cultural. If you look at houses as an example... -
Rich Stidger replied to the thread Baltimore anchorages and Trawler fest 2026.IDK about slips, but we anchored in the inner harbor near the submarine in 2002. There are only 2-3 anchoring spots there. -
My O’Day 322 is about 38 years old. Always sailed on the Great Lakes, stored indoors for many years of her life (but not in the last 12... -
Dalliance reacted to dlochner's post in the thread Was I lucky or what? Forestay failure! with Like.
But there are more DIY sailors than power boaters.
-
BBlitz replied to the thread Catalina Status.FYI - another example was The Cape Dory 36 being built with the same molds as the Robinhood 36 in Maine in the 90's. Also, after...
-
shemandr replied to the thread Starboard side bulkhead replacement.Ugh! I think to replace the bulkhead you need to remove the sink cabinet and the locker forward of the bulkhead. I don't see a mast... -
Anybody out there ever replaced the injector nozzles on a Universal Diesel? I am trying to remove the fuel pipes from the injection... -
Hayden Watson reacted to Stu Jackson's post in the thread Engine went Kaput seven days into a three-week cruise. with Like.
One stud, glued into the hole. No drill/tap. Here's the hole, last post showed the stud glued in.
-
Hayden Watson reacted to Stu Jackson's post in the thread Engine went Kaput seven days into a three-week cruise. with Like.
Here's what I used and the hole it filled. Sent you a pm with the whole story writeup. Devcon 10110
-
Ddlochner replied to the thread Catalina Status.A huge difference between building a new boat and rehabbing one, is the work flow and sequence. When systems are installed in a new...
-
jaysweet replied to the thread Catalina Status.Fair enough: wet core replacement would be a big deal, so that's a good point. I suppose there are enough near derelict boats out there... -
Does efficiency fall off if it’s never recharged/serviced? No. Your old unit will be charged with R 12. A very stable chemical. So... -
NYSail replied to the thread Catalina Status.The fiberglass hull will last, the issue becomes the core. If the boats were solid fiberglass or impervious to water, refurbishing old...