All Activity
-
Rick D replied to the thread Shock Harbor 25.I suggest you post on the Newport Beach association. About Fleet 1 | Harbor 20 Class Association -
Tally Ho replied to the thread Running rig lines aft to cockpit?.I have an O’Day 322. She has 2) 4x rope clutches on the cabintop and 2) 4x organizers near the mast. The organizers are double... -
-
Jim Legere replied to the thread 37 ft cutter Rudder help please.Sent you a PM. -
Cheers! -
Wednesday sunset. Finally a relatively clear night after the hurricanes where we can see the sunset.
-
MI recently bought a Shock Harbor 25 and I have numerous questions. I would like to contact any Shock Harbor 25 members on this Board
-
Ralph Johnstone replied to the thread Hunter 306 Head Head Liner.Not at the boat right now but it seems to me I ran some wiring through here decades ago. This assumes the hard ceiling head hasn't... -
-
Don S/V ILLusion replied to the thread I have this old handheld radio.Alcohol is the most effective (and safe) solvent to dissolve degraded plasticizers causing the sticky feeling. Recognize it’s only a... -
Ddlochner replied to the thread Removing barnacles from CopperCoat.Vinegar works because of the acetic acid in the vinegar. It works slowly because it is diluted to about 5%. Higher strength vinegar is...
-
Not sure what to call this: the head liner in the head? Has anyone with a Hunter 306 (or maybe related models from close to 2004) ever... -
jssailem reacted to spadaforaj's post in the thread Force 10 Oven Problem - Oven control knob won’t turn with
Like.
Thanks for all the advise. Was able to deal with it easily by just spraying some lithium grease into the valve - just removed the knob... -
jaysweet replied to the thread Leak-Quest.Man: I would say "this is starting to get really intriguing". Except that I'd really prefer that it was straightforward, which it is...
-
-
AArt12050 replied to the thread I have this old handheld radio.I’ve had that happen to a pair of Canon binocular. The UV rays broke down the coating to a gummy consistency. I used hand sanitizer, it...
-
AYou’re going to have to recoat with at least one coat of ablative, so may as well sand lightly with 80 grit paper to remove remaining...
-
AThe only way I've ever been able to do it is by using a sander. Maybe someone else here has had better luck using some other method. dj
