All Activity
-
Ccolemj replied to the thread Removing barnacles from CopperCoat.When we had coppercoat, I just used a paint scraper or chisel. One at a time, scrape them off. Hydrochloric (muratic) acid should also...
-
Tally Ho replied to the thread sail tackle above cunningham ring.I had that set up on my O’Day 322 when I bought it. I didn’t love it, and when I replaced the main sail, I went with a regular sail... -
capta replied to the thread I have this old handheld radio.I wish I could be more certain, but it was a long time ago. I have a pair of Canon stabilized binoculars, and after some years the... -
BigEasy reacted to Captain Grey Beard's post in the thread Aft sun shade to use while sailing? (DIY) C-22 with
Like.
Here it is stowed. In case you were wondering. ;) -
BigEasy reacted to Captain Grey Beard's post in the thread Aft sun shade to use while sailing? (DIY) C-22 with Like.
Carl, Here is the Bimini I put on Serenity. I got it off of Amazon. If I remember correctly it was about $150. I've had it installed...
-
Allan12210 reacted to Will Gilmore's post in the thread sail tackle above cunningham ring with Like.
-Will -
PHow to remove cold plate to install new cold plate and compressor? We cut the two copper tubes under stove. Can’t pull out tubes from...
-
Don S/V ILLusion replied to the thread I have this old handheld radio.Good reason to NEVER watch YouTube videos for advice. Dioxins are “petrochemical based” as is TCE, isocyanate, …. and they aren’t flammable -
CCocoa Beach Sailor replied to the thread 37 ft cutter Rudder help please.Well I have come to a plan of action for the moment. Going to hang a small outboard off the back after I build a little transom so that...
-
David in Sandusky replied to the thread Outboard question.Because we really wanted the inboard diesel to take us on cruising legs around Lake Erie when there is no wind, we replaced our original... -
FastOlson replied to the thread Was I lucky or what? Forestay failure!.Hope you (or someone) did a mirror polish on the new SS part. -
FastOlson reacted to dlochner's post in the thread Was I lucky or what? Forestay failure! with
Helpful.
Try ZephyrWerks for the sheaves. He will make them to your specs. I bought one earlier this year. https://www.zephyrwerks.com/ -
-Will -
Spindrift NH replied to the thread Removing barnacles from CopperCoat.I use a spray bottle with vinegar. spray a few barnacles & let it work for a minute then scrape, sometimes needs a respray. It’s slow... -
When I was putting the new chain plate on today, which required the removal of 6 bolts in the anchor roller, I opened a big golf...