All Activity
-
-
BigEasy reacted to kloudie1's post in the thread Force 10 Oven Problem - Oven control knob won’t turn with
Like.
As jssalem says, the valve/igniter can be serviced somewhat. Most of those here in the USA are made by Robertshaw; Force 10 just buys... -
Hayden Watson reacted to Mike Oldak's post in the thread Installing an in the hull transducer with Like.
YES!! I've been motoring around Marblehead Harbor area where aside from all the lobster pots there are numerous rock formations which... -
Stu Jackson reacted to jssailem's post in the thread Force 10 Oven Problem - Oven control knob won’t turn with Like.
I have a 3 burner F10. It can be taken apart and rebuilt. I was having a problem lighting the burners. Removed each burner. Cleaned... -
kloudie1 reacted to Allan12210's post in the thread How accurate does one have to be when measuring Gray Enterprises portlights for replacement? with Like.
My 1985 34 of the same vintage as yours also came with the Gray Enterprises Portlights. They were the same size as @kloudie1 has... -
Allan12210 replied to the thread How accurate does one have to be when measuring Gray Enterprises portlights for replacement?.My 1985 34 of the same vintage as yours also came with the Gray Enterprises Portlights. They were the same size as @kloudie1 has... -
-
jssailem reacted to JamesG161's post in the thread H39 air conditioner supply vent(s) location with Like.
The Air mover fan has "vent" for warmer air, normally called "return air"" The Air is cooled through finned heat exchanger and pushed... -
jssailem reacted to Don S/V ILLusion's post in the thread H39 air conditioner supply vent(s) location with Like.
The factory didn’t install A/C units, ducting or vents. It was typically all done at commissioning so there will b variability in...
-
jssailem replied to the thread Catalina 30 mkii 1989 (built November 1988) serial number 5578, Fiberglass or Wood Core Keel?.There are a lot of boats out there. I think that fall is a good time to find a boat if you can be patient about the process. Owners are...
-
jssailem reacted to Marty1's post in the thread Catalina 30 mkii 1989 (built November 1988) serial number 5578, Fiberglass or Wood Core Keel? with Like.
Hi, Thanks to everyone for the advice. I now have a better understanding of keel and mast issues. Unfortunately, this boat has been...
-
jssailem reacted to kloudie1's post in the thread Force 10 Oven Problem - Oven control knob won’t turn with
Helpful.
As jssalem says, the valve/igniter can be serviced somewhat. Most of those here in the USA are made by Robertshaw; Force 10 just buys... -
jssailem reacted to Stu Jackson's post in the thread How accurate does one have to be when measuring Gray Enterprises portlights for replacement? with Helpful.
If you are definitely sure they are Grey portlights then do not change brands. Look, it is a lot simpler than you are making it. Any...
-
jssailem reacted to kloudie1's post in the thread How accurate does one have to be when measuring Gray Enterprises portlights for replacement? with Helpful.
I happen to have a 512 here.. Measuring the lens itself, it is 5 3/4" wide and 12 11/16 long The 414 lens measures 4 5/8" wide and 14...
-
Stu Jackson replied to the thread How accurate does one have to be when measuring Gray Enterprises portlights for replacement?.If you are definitely sure they are Grey portlights then do not change brands. Look, it is a lot simpler than you are making it. Any...
-
kloudie1 replied to the thread How accurate does one have to be when measuring Gray Enterprises portlights for replacement?.I happen to have a 512 here.. Measuring the lens itself, it is 5 3/4" wide and 12 11/16 long The 414 lens measures 4 5/8" wide and 14...
