All Activity
-
Bbrazenarticle replied to the thread DIY spillover fridge fan control.The Shelly devices as well as Cerbo, Signal K and other sources all are read, displayed and used in automations in Home Assistant. HA...
-
-
As the saying goes, in for a penny, in for a pound. This is a job that needs to be done on the hard. Check the cutless bearing for... -
sailme88 replied to the thread Cracked Weld in Arch (310).Before you attempt the fix, you need to determine the why. Welds just don't spontaneously crack. Often times reciprocal cracks are in... -
Ward H replied to the thread Cracked Weld in Arch (310).@rjadelsohn I don't believe there are many big sport fishers on our end of the bay or even on the BB but there sure are in Cape May... -
Ddlochner replied to the thread O'Day 30 Stuffing Box Hose Replacement.As the saying goes, in for a penny, in for a pound. This is a job that needs to be done on the hard. Check the cutless bearing for...
-
Thanks Ward; my thoughts exactly. He is not going to ascertain the scope of the job or cost estimate until he has a welder(s)...
-
The question of removal of the Arch, assuming the screws/bolts come out, is will we be able to reinstall. The hull is flexible. The...
-
Here is an general geometry picture of the arch - forward leg, starboard side.
-
great product.... but not for this.
-
Sorry, picture didn't post yesterday - now posted.
-
Thanks Ward - Actually, I am an Engineer - had already determined that structurally it was a problem. Am looking to see if anyone has...
-
Don't want to start a fight, but I think the simple question "Can you post pictures so we can better help you?" would be enough without...
-
Ddlochner replied to the thread Cracked Weld in Arch (310).Some general thoughts. The foot of the arch should be separated from the hull. The heat developed while welding will most likely damage...
-
Possibly, but note he is in Comox, on Vancouver Island British Columbia. I gave him local to the island resources. They may even... -
Have you called Trotac in Victoria? Harbor Chandlerey in Nanaimo? or the C36 Forum? Good luck.
