All Activity
-
JoeWhite replied to the thread Rain water in main lazarette.My C36 has no seals. There is a groove around the lid of the lazarette where the lid rests. It is a gutter to direct the water to the... -
In north Atlantic is named Cristobal Jim... PS: Fish Storm -
From the African Storms, August typical, is beginning. 1. Central Tropical Atlantic (AL92): An area of showers and thunderstorms...
-
FastOlson replied to the thread Similar to the Illusion 12 but a mystery.I recall reading, several years ago, that a fleet of very similar boats was being raced by a large YC up in BC Canada. This might have... -
I stopped dealing with rubber spreader boots and rigging tape years ago. Switched to the low friction rolling spreader wheels that... -
Unfortunately, contrary to popular belief, the lines that are on a boat when new or newly purchased are not life long attachments that... -
The line on my old furler would get stiff as it aged and got dirty. Thought the furler was the problem, until I put a new furler line...
-
Have you washed the accumulated dirt out of the furler line recently. Dirty line stiffens and can swell making a smooth wrap on the...
-
thinwater replied to the thread Active cooling Cryo paint on decks?.If covering hatches is the thing ... Painting can work if it's never occupied, like a sail locker. This is probably more for UV and... -
kloudie1 reacted to Ralph Johnstone's post in the thread keel boat torque for Beneteau 323 with
Like.
This was sent to me by Hunter some 20 years ago : There's nothing magic about these figures, they're just the max. allowable stress... -
sailme88 replied to the thread Electric toilet.NO... -
Davidasailor26 reacted to Rick Webb's post in the thread Sagging deck by the companionway coaming with Like.
With no cracking of the gelcoat, I'm inclined to believe that is just how the boat was made or there was a repair done that turned out... -
Davidasailor26 replied to the thread Sagging deck by the companionway coaming.That was my first thought too. If nothing is cracked, nothing feels soft, and the sliding hatch isn’t binding, I’d assume it came out of...
-
I sure do! It was the first hardware store I called My Favorite Marine Store! You essentially made an exhaust elbow into an exhaust... -
Dalliance replied to the thread Canvas spreader boot.I stopped dealing with rubber spreader boots and rigging tape years ago. Switched to the low friction rolling spreader wheels that...
