All Activity
-
This is perfect. Thank you very much for your time! -
I used to have the rubber ones, cracked severely. Switched to the Edson leather ones and been happy with those. -
Tape and crevice corrosion is where its at!
-
BBlitz replied to the thread Canvas spreader boot.I used to have the rubber ones, cracked severely. Switched to the Edson leather ones and been happy with those.
-
Rick Webb replied to the thread Sagging deck by the companionway coaming.With no cracking of the gelcoat, I'm inclined to believe that is just how the boat was made or there was a repair done that turned out... -
Stu Jackson replied to the thread Hunter 34 1984 Yanmar 3GMF issue.I sure do! It was the first hardware store I called My Favorite Marine Store! You essentially made an exhaust elbow into an exhaust... -
Allan12210 replied to the thread Roller Furlor binds.And put the line in a pillow case. Otherwise you might end up with a tangled mess. -
Allan12210 replied to the thread Hunter 34 1984 Yanmar 3GMF issue.Great information already posted. Ours failed the same way in 2011. We were the cruise leaders for a revived weeklong yacht club...
-
-
DinghySailor replied to the thread Canvas spreader boot.Pretty, not particularly easy to take off for shroud inspection and stitch back on on an annual basis.
-
Have examined the ones at Fisheries? https://www.fisheriessupply.com/boat-leather-spreader-boots
-
Ralph Johnstone replied to the thread keel boat torque for Beneteau 323.This was sent to me by Hunter some 20 years ago : There's nothing magic about these figures, they're just the max. allowable stress... -
-
RE PO Original post. I have a Harken furlor on my Pearson 28. Operated flawlessly for 10 years. Now it binds frequently when I am...
-
jssailem replied to the thread Canvas spreader boot.Have examined the ones at Fisheries? https://www.fisheriessupply.com/boat-leather-spreader-boots
-
:yikes: OMG! Well, I did replace some of them, with stuff left coiled by the skip.
-
jssailem replied to the thread Where to buy Vinylester Resin?.Here is a site Newport NSW 2106, Australia Not sure how far from you that claim to have vinylester resin...
