All Activity
-
I looked at a rebuild too. I went ahead and replaced my pump and my accumulator. I assume they were both original. The new pump pulls... -
Stu Jackson reacted to shemandr's post in the thread Anchor's Aweigh... I'm really tempted by the lightest anchor.. with
Like.
The Fortress is a good anchor. I was a skeptic until I was on a boat with one. It literally glides forward to the bottom. It had... -
Stu Jackson replied to the thread Engine Wiring Harness.Ray, usually the wires are OK, it's the damned connectors that corrode and fail. Also, my experience us the color coding is usually...
-
rpwillia replied to the thread Engine Wiring Harness.FWIW, I found the wiring diagram for the Preheat Solenoid, makes more sense now. -
-
BBruce Schwartz replied to the thread Stanchion bolts.anyone know size of Nut
-
shemandr replied to the thread Anchor's Aweigh... I'm really tempted by the lightest anchor...The Fortress is a good anchor. I was a skeptic until I was on a boat with one. It literally glides forward to the bottom. It had... -
KKCofKC replied to the thread Large area hull deformation - Is this concerning?.I agree with what has been said but I would tend to be of the opinion that the oil canning is caused by too much weigh on the keel...
-
Let it go Stu; not worth the worry!
-
Solved…… hole in the intake hose where it went through a wall. I hit it with a saw this spring when I was moving my shower pump... -
My O’Day 322 furling line was originally routed along the toe rail and was cleated off on the outboard deck near the helm. I meant...
-
JJan11 replied to the thread SimRad WP30 Autopilot.Richard19068 I believe you meant "E6000", not E600. Good stuff. The drive ring assembly drawing looks like my work. M5 screws and...
-
Thank you all for confirming how this goes together with out me having to completely disassemble it to figure it out. I was able to get... -
A few questions they didn't ask. a. In cold weather or off-shore, the single-hander has to be very optimistic to believe he is better... -
Justin_NSA replied to the thread Fresh water tank pump died..I looked at a rebuild too. I went ahead and replaced my pump and my accumulator. I assume they were both original. The new pump pulls... -
Mine became problematic approximately 5 years ago. The OEM pump was 15 years old. I checked out the cost of replacing the rubber...
