All Activity
-
Terry Cox replied to the thread Cruising the BC Gulf Islands..Hi Len. Bod I zava. But Bodhi works, too. -
fred1diver replied to the thread Start button.I would probably just do what the PO did, the cables run behind the SS tubing and is ty-wrapped around the tubing, there are cable clams... -
Ralph Johnstone replied to the thread Electrical Panel LEDs.I've got a few here purchased from the SBO store to fit a Hunter electrical panel. If this is your panel, they fit. -
-
Great Scott man, I think you've got it. The one on the right indicates "something" for sure. The symbol on the left is definitely a... -
fred1diver replied to the thread Raymarine wind anemometer cable.Thank you everyone, I managed to find some on Amazon for a good price, will order soon Thank you again
-
fred1diver replied to the thread Start button.I will take pictures next time I am at the boat, but basically on the binnacle or the SS pedestal support
-
A couple of my displays have gone bad. They still work, but they are hard to read. Is there anyone who repairs them? The Lowrance, I can... -
-
I started a thread over on SailNet about it. I go into what I did, what I used, how much it cost, and how I discovered it. See... -
anyone have a source for these 'on' LEDs? Years ago the only ones I found were too big. The hole seems to be about 1/4". The LED is...
-
-
JoeWhite reacted to rgranger's post in the thread Victron MultiPlus not charging after generator capactor blew with
Like.
If your alternator is producing power and it’s not reaching the system, you have a blockage or open circuit. This may be a long shot... -
eherlihy replied to the thread Cabin top hand rail.I started a thread over on SailNet about it. I go into what I did, what I used, how much it cost, and how I discovered it. See... -
JoeWhite replied to the thread Raymarine wind anemometer cable.As Don mentioned in post#3, I would use hand held microphone wire. They have 4 conductors and are shielded.
-
Richard19068 replied to the thread Cabin top hand rail.Interesting. Those boxes look good. I've never heard about UV curing varnish before. I'm a little unclear on how that would work on...
-
Ralph Johnstone replied to the thread Polish and UV protect Beckson portlight lens? Or replace?.I know that's the popular opinion here but not only do I have a couple of large cracks as shown in post #3, I also have many very small...
-
Ralph Johnstone replied to the thread What are these indicators?.Great Scott man, I think you've got it. The one on the right indicates "something" for sure. The symbol on the left is definitely a...
