All Activity
-
Hello everyone, after refitting my head, I am missing around 2 feet of cable for my wind instruments. What type of cables can I use ? Or... -
Strictly speaking, the paint doesn’t have to violate thermodynamics to work...but it would have to overcome extremely unfavorable... -
jssailem replied to the thread Polish and UV protect Beckson portlight lens? Or replace?.That looks like someone dropped something on the plastic.
-
jssailem reacted to rgranger's post in the thread Victron MultiPlus not charging after generator capactor blew with
Helpful.
If your alternator is producing power and it’s not reaching the system, you have a blockage or open circuit. This may be a long shot... -
I need to get my binoculars and see if I can spot it at the upper mast. Thanks for the replies......I will post again when I have this...
-
Thanks to people's republic of Oregon. :) Ample beer on the shelves around our precincts. Must stock up on Bodhizava before I leave.Yum!
-
That's the funny thing about taxes that our bureaucrats fail to understand. They raise taxes in hopes of increasing revenues, but the...
-
Terry Cox replied to the thread CAMPING FEES IN BC. BE AWARE!.That's the funny thing about taxes that our bureaucrats fail to understand. They raise taxes in hopes of increasing revenues, but the... -
Terry Cox replied to the thread Cruising the BC Gulf Islands..Thanks to people's republic of Oregon. :) Ample beer on the shelves around our precincts. Must stock up on Bodhizava before I leave.Yum!
-
Johann replied to the thread Victron MultiPlus not charging after generator capactor blew.Have you tried turning both Multis off then back on with the physical rocker switch on the unit? Also reboot the Cerbo perhaps. -
I'll tell you that IF I still used the teak handrails, I would try to use UV Curing Varnish with them. I just discovered this stuff. It...
-
fred1diver replied to the thread Furler Q’s.The issue is that the black end cap on top is preventing the forestay from attaching itself to the mast head, that is why I NEED to add...
-
eherlihy replied to the thread Cabin top hand rail.I'll tell you that IF I still used the teak handrails, I would try to use UV Curing Varnish with them. I just discovered this stuff. It... -
-
Davidasailor26 replied to the thread Oceanis 370 freshwater tank selector valves.On the newer 37 the valves are on a manifold right next to the pump, under the port settee. Be sure only one is open at a time. We also...
