All Activity
-
jssailem replied to the thread Cruising the BC Gulf Islands..Rumor is you have good beer up there. We are running out down here. Seems there has been an influx of Football fans. They are drinking... -
sailcapt340 replied to the thread Start button.Ralph, I thank you for the compliment. As far as the fiver til payday, that kind of sounds like “Wimpy” and “ I’ll gladly pay you... -
John, bring many friends and family and slip mates . . . with fat wallets.
-
Davidasailor26 replied to the thread What are these indicators?.On the left is a battery monitor. Right now it’s showing voltage of some battery (whichever is specter). Pressing the % button probably... -
Hello Below replied to the thread Cruising the BC Gulf Islands..John, bring many friends and family and slip mates . . . with fat wallets. -
JThese 2 indicators are on the nav station area of my new to me 2008 Hunter 31. I don't know what they are supposed to do. Please advise...
-
-
eherlihy reacted to dmax's post in the thread O'Day 40 (1987) Port Hull Balsa Core Moisture with
Like.
I had an O'Day 35 with the typical moisture around the chain plates. I removed 1/2 - 1" of the wet core surrounding the chain plate... -
Davidasailor26 replied to the thread Galvanic Corrosion/zinc depletion question..And that’s why diving or swimming near boats in fresh water is not recommended - In salt water the current has a pretty conductive...
-
eherlihy reacted to DonEvans's post in the thread O'Day 40 (1987) Port Hull Balsa Core Moisture with Like.
Session learned for other owners, next haul-out remove your transducers, remove an inch or so of balsa around the hokes, fill with...
-
Thank you! I think what I will need to do is this.......see if I am on the right track. I already have an asymmetrical spinnaker ...like...
-
eherlihy replied to the thread Cabin top hand rail.Here, in the foreground, is how the original handrails looked; (the inside handrails are in the back).
-
-
Davidasailor26 replied to the thread Galvanic Corrosion/zinc depletion question..I don’t see why having a 50hz designed boat receive 60hz would have any impact on zinc loss. Many appliances are designed to work with...
-
Thanks! I do occasionally need to "polish" the handrails with a Magic Eraser to remove the spots that invariably develop on 304...
-
jssailem replied to the thread Galvanic Corrosion/zinc depletion question..My diver tells me he gets a tingle when near a boat that is poorly grounded or leaking electricity into the surrounding waters. Tells me...
-
jssailem reacted to JamesG161's post in the thread Galvanic Corrosion/zinc depletion question. with Like.
Guessing from me... Boats from non USA use 50 Hertz frequency versus 60 Hertz. If one is nearby you... Big Zinc loss Jim...
