All Activity
-
jssailem replied to the thread Help! Rotted wood in 1982 javelin - structural or aesthetic issue?.:biggrin: :beer: It is a process. Best of luck. I suspect the value of a Javelin with the issue you described would likely be $400–$900... -
jssailem reacted to jakenelson345's post in the thread Help! Rotted wood in 1982 javelin - structural or aesthetic issue? with
Like.
@shemandr and @jssailem - thanks for both of your thoughts. I was able to have someone who knows a little more actually check out the... -
kloudie1 reacted to jakenelson345's post in the thread Help! Rotted wood in 1982 javelin - structural or aesthetic issue? with Like.
@shemandr and @jssailem - thanks for both of your thoughts. I was able to have someone who knows a little more actually check out the... -
Ccolemj replied to the thread Hunter 33.5 compression post replacement without de-masting — feasible?.I have removed a compression post from our previous boat (40' catamaran) without removing the mast. If you loosen the rig, the only...
-
-
Ddlochner replied to the thread Almost there. Few more questions.A simple single block with a swivel appropriately sized for the line. A Harken 29mm Carbo Air block would be a good choice if you down...
-
Ddlochner replied to the thread Almost there. Few more questions.It will work better if there is a block at the end of the boom. Also the line size looks pretty big. On a 15' boat ¼" or 5/16" will...
-
I've pulled my forestay and held the mast up for several weeks using a halyard and spinker halyard - essentially two halyards - without... -
Fred. During the process of replacing my furler, my rigger used halyards to secure the mast. It took about 48 hours to remove the old...
-
Thanks Bob. The beauty of cell phone cameras. You can get in everywhere. I've read a posting on this site from way back suggesting the... -
jssailem replied to the thread Furler Q’s.Fred. During the process of replacing my furler, my rigger used halyards to secure the mast. It took about 48 hours to remove the old...
-
fred1diver replied to the thread Furler Q’s.Ok, I will plan accordingly, thank you
-
FastOlson reacted to JRacer's post in the thread Polish and UV protect Beckson portlight lens? Or replace? with Like.
With the newer ceramic coatings available, I might be inclined to ceramic coat the poly "glass" windows after doing a thorough cleaning... -
kappykaplan replied to the thread Furler Q’s.:plus: -
BarryL replied to the thread Furler Q’s.Hello, Over the years I have had a number of new furling units installed on a number of boats. The rigger always used a halyard as a... -
Hello everyone A few quick questions, I just received my new forestay, I still have to install the furler back on and assemble. First...
