All Activity
-
If I were you I'd contact Rolly Tasker and tell them your sail is too big. It doesn't fit... the vertical hoist is incorrect... -
jssailem replied to the thread Overheat adventure on 1985 Universal M12.Sometimes it is best to accept the good things in sailing. Perhaps Possiden was feeling generous.
-
jssailem replied to the thread Would try sailing one of these flying boats?.It looks like a fun boat to enjoy a day of sailing when the water temperatures are above 70. The builders say that the boat is light and...
-
jssailem reacted to rgranger's post in the thread Would try sailing one of these flying boats? with
Ha.
If the name of this boat is the slang form of Joda .... then I love the name of this bote pequeño .;) -
Thank you very much for the info and suggestions.i'll try that and see. many thanks.
-
Well... this might help.... or it might do nothing... or it might make it worse...nevermind:facepalm: -
So dynamite it is. -
Joe replied to the thread New Headsail Adjustments.If I were you I'd contact Rolly Tasker and tell them your sail is too big. It doesn't fit... the vertical hoist is incorrect... -
kloudie1 replied to the thread Water in the Bilge.Welcome to the forum, Jim! Lots of good info here especially in the parts labeled "Owner Resources" and other "click on" sections... -
Oodaydokay replied to the thread Overheat adventure on 1985 Universal M12.Terrific, Richard. Many thanks. I had the coolant pump replaced two seasons ago at the very end and last year I did see some temperature...
-
jssailem replied to the thread Water tanks location.If the sensor is functioning you can measure the electrical resistance with a digital voltage meter using the Ohm meter function. This...
-
The foot of most general purpose jibs is below the lifeline at the tack. This allows for a larger sail and more power. Some sailors have... -
Too much scalloping on the luff of the sail, which is why we're questioning if the sail is fully hoisted. Looks like the luff is too...
-
It looks to me like the sail needs halyard tension. Is the top of the at the sheave or stopper? If so, I think it may be too long...
-
Ddlochner replied to the thread Hunter 25 2006 - improve secure mooring.I bought a similar product to protect the coaming from the roller furling line. I think I purchased it from the SBO store. Something...
