All Activity
-
Eeast coaster replied to the thread Hunter 25 2006 - improve secure mooring.There is a product I purchased some time ago for this purpose of protecting my hull from line chafe. The name escapes me but there...
-
-
Several possible explanations. The hose is clogged and water can't get through. It is normal behavior. The common bilge pumps in our... -
Or a ShopVac.
-
Sunbird22358 replied to the thread Sink Water Supply.In theory, there should be 3 connections on the tank. 1) the 1.5" would be for a deck-fill (or if you have access to the tank and htis... -
-
BigEasy replied to the thread HUNTER 340 Yanmar 3GM Engine Mounts... OUCH!.Original Yanmar mounts are definitely NOT stainless steel. Also note the hardness rating stamped into the side of the rubber...
-
For a finish, a mechanical bond is enough. After all, nobody blinks twice at painting an epoxy repair, but for some reason gelcoat over...
-
cephius (Dave) replied to the thread Disconnect or leave connected the standing rigging when mast is down?.I also leave the shrouds attached. When the mast is down, I pull them forward and lash them to the mast. -
jssailem reacted to Charles Erwin's post in the thread Volvo Sail Drive sudden rapid galvanic attack damage and management question with
Like.
PS Volvo engineers want that drive isolated. Ask them why. They will probably say we want no path for DC negative return to battery nor... -
jssailem reacted to Charles Erwin's post in the thread Volvo Sail Drive sudden rapid galvanic attack damage and management question with
Helpful.
Your first post says 'all fine now.' So if all fine then what was the source of the problem? Either way note - calcium precipitation... -
Ddlochner replied to the thread Disconnect or leave connected the standing rigging when mast is down?.I'd leave it connected to the mast and secure it against the mast with bungee cords or some light line or webbing. Watch out for the...
-
Ddlochner replied to the thread New Headsail Adjustments.Looking at the photo @garymalmgren posted, the luff on the main looks too short. Or the main is not fully hoisted. Look at the photo...
-
-
Davidasailor26 replied to the thread Volvo Sail Drive sudden rapid galvanic attack damage and management question.This is an interesting observation. It sounds to me like the saildrive wasn't damaged by corrosion itself, but by scraping the deposits... -
shemandr replied to the thread New Headsail Adjustments.With the scalloped luff you boat will not point as a masthead rig should. Masthead jibs really like a nice clean entry to perform well... -
jssailem replied to the thread Water tanks location.There are a couple of sensor styles. I do not know what was used on your boat or if a previous owner may have installed special. One...
-
Richard19068 replied to the thread Overheat adventure on 1985 Universal M12.I don't think the raw water is affected by the thermostat. Only the coolant. FRESH WATER CIRCULATION DIAGRAM ALL MODELS EXCEPT M-15...
