All Activity
-
Ccolemj replied to the thread Heat generation from Victron DC to DC Charger.No, this is not at all how lithium works. There is no difference in this between lead and lithium, except that lithium gets to a...
-
kappykaplan replied to the thread New Headsail Adjustments.Too much scalloping on the luff of the sail, which is why we're questioning if the sail is fully hoisted. Looks like the luff is too... -
Oodaydokay replied to the thread Overheat adventure on 1985 Universal M12.If I can do so, without sharing off the bolts, of course. Maybe not such an easy deal as it looks.
-
If you are applying Cetol over wood that is epoxy coated, that may be your problem. I have found that not all varnishes, for example... -
Oodaydokay replied to the thread Overheat adventure on 1985 Universal M12.Much obliged, Stu!
-
BBarnacle Bill replied to the thread Cetol.If you are applying Cetol over wood that is epoxy coated, that may be your problem. I have found that not all varnishes, for example...
-
BBarnacle Bill replied to the thread Re: 1984 Hunter 27 - Bow Damage.There once was a black plastic cover that was bolted in place under the stemhead fitting and that is not seen in any of your pictures...
-
BBarnacle Bill replied to the thread New Headsail Adjustments.To me, it looks like, when close hauled, the sail should be inside the lifelines when trimmed. That will give you the best performance...
-
Maine Sail replied to the thread How to stop false 100% battery status.Guessing at batt capacity is like throwing darts blindfolded. It will make any level of accuracy difficult. Charge Efficiency 80%... -
Johann replied to the thread Heat generation from Victron DC to DC Charger.The Wakespeed has the ability to adjust output based on RPM, as does the Zeus. The Zeus just has an easier interface (from the old... -
Ccolemj replied to the thread Heat generation from Victron DC to DC Charger.No argument there. My point was that the Hitachi 60A should never be connected to lithium at all. The only way to do that is to...
-
Vinylester is great. However, it is a bit persnickety to use because it requires a narrower range of environmental conditions, closer... -
Ccolemj replied to the thread Gelcoat over Epoxy.Vinylester is great. However, it is a bit persnickety to use because it requires a narrower range of environmental conditions, closer...
-
Ccolemj replied to the thread Gelcoat over Epoxy.I intentionally stayed away from that point to stay on topic of gelcoat over epoxy, but now that you brought it up... The use of epoxy...
-
Ccolemj replied to the thread New Headsail Adjustments.When that sail is fully raised, it looks like it won't interfere with the lifeline anymore. Why isn't it fully raised? Mark
