All Activity
-
shemandr replied to the thread Would try sailing one of these flying boats?.No. SAIL had a review in the last issue. The author claimed that it is much easier to sail than imagined. He's probably a lot younger... -
shemandr replied to the thread New Headsail Adjustments.It looks to me like the sail needs halyard tension. Is the top of the at the sheave or stopper? If so, I think it may be too long...
-
Stu Jackson replied to the thread Overheat adventure on 1985 Universal M12.But it could leak when the pump/engine is off. Engine Coolant Flow 101 Maybe this will help you understand the coolant flow... -
Stu Jackson replied to the thread New Headsail Adjustments.What is the situation at the head of the sail? Photos? Of course you can add a pennant at the foot.
-
Stu Jackson replied to the thread Re: 1984 Hunter 27 - Bow Damage.While this is a possible quick coverup, i suggest you consider the implications of a large area at the bow of your boat being made of...
-
Alan Gomes replied to the thread Gelcoat over Epoxy.I had my local boat yard use it for a couple of blister repairs during my haul out at the end of last year. No problem at all obtaining... -
JRacer replied to the thread New Headsail Adjustments.Unless it is not all the way pulled up to the top of the stay, it's a "deck sweeper", intended to be at deck level. -
Phil replied to the thread Wednesday is Photo Day 2025.Cook's Bay Mo'orea. -
Alan Gomes replied to the thread Gelcoat over Epoxy.How about using vinylester resin? It makes a much better secondary bond to polyester, is far more impervious to blistering (below the...
-
Alan Gomes replied to the thread Noisy carp on the bottom.So dynamite it is.
-
-
I just discovered (likely because I am a bit slow) this flying sailboat. IODA by Birdyfish. They look like tremendous fun.
-
-
FastOlson reacted to dlochner's post in the thread Heat generation from Victron DC to DC Charger with
Like.
Depends on the charger, the larger the current the higher the temp. Look at the efficiency rating for the model you have, higher... -
Johann reacted to colemj's post in the thread Heat generation from Victron DC to DC Charger with Like.
If the alternator is an OEM Hitachi 60A, don't waste the time, effort, and money converting it to external. There just isn't enough... -
hunter240 replied to the thread Hunter 240 What is the best motor for a 240?.I have been using a Mercury 9.9 Prokicker long shaft with electric start and power tilt for 4 years with no problems. on my 1998 240...
