All Activity
-
Good to see this myth put to rest. I've used gelcoat over epoxy many times with no issue, but I've stopped trying to convince others... -
From time to time, SBO members as if gelcoat can be applied over epoxy. This question usually comes up in a discussion about hull repair...
-
David wins Forum IT User of the month, guys. Good catch. The certificate had the full chain, but only 1/3 certificates was being sent to... -
Ddlochner replied to the thread Gelcoat over Epoxy.I don't disagree, however, the video seems geared towards repair work done by DIYers and yards who prefer to use epoxy for repairs.
-
Ddlochner replied to the thread H37C - Salon Interior Window Frames.It was pretty common back in the day for boat builders to use off the shelf glazing products for fixed ports, nothing marine grade about...
-
Ddlochner replied to the thread HUNTER 340 Yanmar 3GM Engine Mounts... OUCH!.I had a yard install Ellebogen mounts last year. They were about half the price of Yanmar brand mounts...
-
Ddlochner replied to the thread Rubbing edge return to normal.The only solution is heat and tension. Gently warm the rubber with a heat gun, being careful to avoid burning or scorching it. The...
-
Jim Legere replied to the thread Gelcoat over Epoxy.I am not a chemist, but I believe that chemical bonding of polyester to polyester happens while polymerization is still occurring -... -
Jim Legere reacted to dLj's post in the thread Heat generation from Victron DC to DC Charger with
Like.
Agreed. However, sure seems penny wise and pound foolish to me. If upgrading to LiFePo batteries, going to externally regulated then... -
Jim Legere reacted to Johann's post in the thread Heat generation from Victron DC to DC Charger with Like.
If you have an internally regulated alternator, you wouldn’t want to charge the LFP house with it for a few reasons. First, the...
-
Jim Legere replied to the thread Rubbing edge return to normal.Heat gun?
-
Jim Legere replied to the thread HUNTER 340 Yanmar 3GM Engine Mounts... OUCH!.Just be aware that you will be paying tariffs - see Rich Stidger's post about ordering from ellebogen. EDIT: sorry, disregard. I see...
-
EThe photo illustrates my problem. Had to remove the rubber part (rubbing edge to me) to repair underlying Fiberglass, now have to get...
-
-
Captain Larry-DH reacted to MFD's post in the thread Recommendation for "mattress in a box" with
Helpful.
I went with two 3" Talalay Latex toppers from SleepEZ. The reason for two toppers instead of a single mattress was to make it easier to... -
kloudie1 reacted to Davidasailor26's post in the thread Quick Question About SBO Site Access with Like.
SSL Labs does show some certificate problems with the site’s configuration. It looks like one of the certificates in the certificate...
