All Activity
-
Jim Legere replied to the thread Gelcoat over Epoxy.I am not a chemist, but I believe that chemical bonding of polyester to polyester happens while polymerization is still occurring -... -
Jim Legere reacted to dLj's post in the thread Heat generation from Victron DC to DC Charger with
Like.
Agreed. However, sure seems penny wise and pound foolish to me. If upgrading to LiFePo batteries, going to externally regulated then... -
Jim Legere reacted to Johann's post in the thread Heat generation from Victron DC to DC Charger with Like.
If you have an internally regulated alternator, you wouldn’t want to charge the LFP house with it for a few reasons. First, the...
-
Jim Legere replied to the thread Rubbing edge return to normal.Heat gun?
-
Jim Legere replied to the thread HUNTER 340 Yanmar 3GM Engine Mounts... OUCH!.Just be aware that you will be paying tariffs - see Rich Stidger's post about ordering from ellebogen. EDIT: sorry, disregard. I see...
-
EThe photo illustrates my problem. Had to remove the rubber part (rubbing edge to me) to repair underlying Fiberglass, now have to get...
-
-
Captain Larry-DH reacted to MFD's post in the thread Recommendation for "mattress in a box" with
Helpful.
I went with two 3" Talalay Latex toppers from SleepEZ. The reason for two toppers instead of a single mattress was to make it easier to... -
kloudie1 reacted to Davidasailor26's post in the thread Quick Question About SBO Site Access with Like.
SSL Labs does show some certificate problems with the site’s configuration. It looks like one of the certificates in the certificate... -
David wins Forum IT User of the month, guys. Good catch. The certificate had the full chain, but only 1/3 certificates was being sent to...
-
kloudie1 replied to the thread HUNTER 340 Yanmar 3GM Engine Mounts... OUCH!.Folks have given good reviews of these mounts: https://ellebogen.com/us/yanmar-engine-mount-replacement-marine-engine-yanmar-2gm20/
-
cephius (Dave) replied to the thread Hunter 240 What is the best motor for a 240?.The first motor on my H260 was a 1hp Yamaha. This pushed the boat just fine in calm conditions. Any wind, boat wake, current and I... -
DDavid wins Forum IT User of the month, guys. Good catch. The certificate had the full chain, but only 1/3 certificates was being sent to...
-
heritage reacted to dLj's post in the thread Heat generation from Victron DC to DC Charger with Like.
Agreed. However, sure seems penny wise and pound foolish to me. If upgrading to LiFePo batteries, going to externally regulated then... -
Davidasailor26 reacted to soarchrist's post in the thread Quick Question About SBO Site Access with Like.
David wins Forum IT User of the month, guys. Good catch. The certificate had the full chain, but only 1/3 certificates was being sent to... -
Don S/V ILLusion replied to the thread Tariff surprise on foreign parts.This isn’t the place to debate tariffs so all I will say in response is to look at NAFTA to better understand how tariffs work both...
