All Activity
-
jssailem replied to the thread Windfinder VS Local Knowledge.John Try WINDY.com Use their “Distance & route plan”function. Choose your start and finish location. Choose the date and time. Set your... -
-
Hello, We‘re a little later in the year than we’d hoped moving our boat from its winter home in Bay City, MI to it‘s summer home in... -
BigEasy reacted to piratesnail's post in the thread Recommended, reasonably low-cost upgrades? with
Like.
I forgot to ask about biminis, which were probably the most common answer on the Starwind FB group. Any guidance about where to get... -
This is your number one "go to" for size. Secondly, my 1998 H-310 has a 1" thru-hull and hose. I can't see anything bigger going down...
-
I did a little digging. Looks like Stuart Marine aquired the rights to sell Typhoon parts when the company closed. Their page has a...
-
Hello, My boat came with a profurl. It's OK but not great. When it broke I replaced it with a Reefit. Like Mark wrote above, I bought...
-
Don Crowther replied to the thread Packing Gland.Well the good news is that i got though to the store and they gave me a name. Eddie Marine sells this packing gland. It's a Morse brand... -
shemandr replied to the thread Irwin 38 mkii.I sailed an overnight ocean passage on one in the 90's and we thought it was a pretty good boat. I was not tuned into build quality at... -
BarryL replied to the thread Furling system.Hello, My boat came with a profurl. It's OK but not great. When it broke I replaced it with a Reefit. Like Mark wrote above, I bought... -
If you want all the features and quality of the Harken MkIV, which is a fantastic furler, but want to pay 1/2 the price, the Reefit is...
-
shemandr replied to the thread Furling system.I would guess that a 1972 Pearson 30 would not have jib furling as original equipment. 'Course I was 17 years old and didn't sail. So ...
-
Unless the fan motor is rated explosion proof, you don't want to pull potential gas fumes through it. To push clean fresh air out would... -
Ralph Johnstone replied to the thread Thru hull for front vanity.This is your number one "go to" for size. Secondly, my 1998 H-310 has a 1" thru-hull and hose. I can't see anything bigger going down...
-
-
PPAC3142 replied to the thread Hunter boarding ladder platform.....I assume you are talking about the transom boarding ladder, probably made from 1" stainless steel tubing. We had one on our old C+C...
-
kappykaplan replied to the thread Quick Question About SBO Site Access.Still can't connect with Comcast.
