All Activity

What's new Recent Activity New media New media comments All Activity
  • jssailem
    jssailem reacted to jaysweet's post in the thread leak to bilge in head with Helpful Helpful.
    I managed to find a leak recently by taping plastic over all the places nearby (on the outside of the boat) that I suspected, and...
  • jssailem
    jssailem reacted to Maine Sail's post in the thread Terminal connectors with Helpful Helpful.
    This may help: Crimp Heat Shrink Terminals Like a Pro
  • jssailem
    jssailem replied to the thread Express 35 quadrant stop.
    When the plastic breaks, the only solution is to replace the part. I found success with Fisheries Supply in Seattle. I have also found...
  • jssailem
    jssailem reacted to jag55's post in the thread Express 35 quadrant stop with Like Like.
    John, mine is the Mk2 not the + model. The ring is ok. I managed to break one of those three pins on the inside of the cover that...
  • jssailem
    jssailem replied to the thread The Dreaded Head.
    What type of head do you have? Your query says you replaced the joker valve. The assumption is that the replacement was properly...
  • jssailem
    jssailem replied to the thread Masthead for a Montgomery 17.
    Long shot ideas. Jerry Montgomery designed the Sage 17. I understand Sage Marine, in Colorado, was closed about 2021. You may be able to...
  • P
    PAC3142 replied to the thread Hatch riser identification.
    Specifically, try https://shop.hunterowners.com/hp/hunter_hatch.php?m=35.5&c=1&p=53688
  • markgoldfarb
    markgoldfarb replied to the thread The Dreaded Head.
    I have a 1994 Hunter 37.5. I have changed the joker valve and ran a snake into the tank. And yet when i return to the boast the head is...
  • jssailem
    jssailem reacted to Stu Jackson's post in the thread Aft cleat for Jib Sheets? with Helpful Helpful.
    Clam cleats are notorious for intermittent holding. As such, they are a poor choice for this application. IIRC, my 1981 C22 #10496...
  • OS2Dude
    OS2Dude replied to the thread Aft cleat for Jib Sheets?.
    I added aft cleats (Actual horned cleats, not jam or clam ones) to my 1985 Catalina 30 which I single handed all the time. Don't forget...
  • Alan K
    Alan K reacted to jssailem's post in the thread Hunter boarding ladder platform.... with Like Like.
    Such complaints miss the elegance of a small step for a dainty foot while boarding a magnificent ship.:biggrin::biggrin:
  • Alan K
    Alan K replied to the thread H340 Mainsail Outhaul system mystery....
    The sheave and jammer on my 380 is where the outhaul line exits the boom. There is a sliding car with another sheave within the boom...
  • D
    dlochner replied to the thread Electric toilet.
    Wire size is based on 2 factors, the current being carried and the length of the wire from the power source to the device and back to...
  • Indysailor
    Indysailor replied to the thread Aft cleat for Jib Sheets?.
    I may need a photo because I'm not quite understanding how you can even reach the winches to load/unload if you can't get to the cleats.
  • C
    colemj replied to the thread Electric toilet.
    We have two of those. Maybe they draw 15A, but the flush cycle is so short that it doesn't matter - like others have said. Mark
Show older items
Top Bottom