All Activity
-
BBrian M H23 replied to the thread Hunter Legend 310 - new potential owner.I own a similar boat, 1996 29.5. Did the cutlass myself, it was a bit of a chore. I would recommend doing what you need to do to get...
-
Davidasailor26 replied to the thread Rant on dual helms.Part of the advantage of the dual helm is when sailing - you can still sit on the rail where visibility is good and reach the wheel... -
Hayden Watson replied to the thread Adding a valve to the black tank outlet.It will NOT be a Jobsco pump. My last one was a Jobsco and I wish that its only problem was that it locked up. The rods that hold the... -
Davidasailor26 replied to the thread Furling line control.Ours came with a Spinlock XAS clutch. Works fine for us. I can’t think of anytime I’ve wanted to release faster than I could open the...
-
fred1diver replied to the thread Water tank vents.That might be a viable Solution, we do have one as well collecting dust -
I went with an in-line strainer. Worked great. It was simpler than changing the fitting, and I had it in the might-need bin. I cleaned...
-
thinwater replied to the thread Water tank vents.I went with an in-line strainer. Worked great. It was simpler than changing the fitting, and I had it in the might-need bin. I cleaned... -
fred1diver replied to the thread Furling line control.Ok, very interesting, I just cannot figure how or where that would be located for our application at the moment
-
CCalif. Ted replied to the thread Water tank vents.Many Catalinas from 90's onward used same vents for water and fuel tanks, a different vent was used for holding tanks.
-
-
Ddlochner replied to the thread Furling line control.That is not the route I would go. A ratchet block with a cam cleat will work and allow for a quick release of the line if necessary. The...
-
I spend an absurd amount of time looking at boat listings on yachtworld (because it's fun). And I have to say, there's one thing* I just... -
Terry Cox replied to the thread Water tank vents.Fred said he wanted a water tank vent, not a holding tank vent. Our boat has one like what I suggested from Defender. -
Hello all, last season we move the furler line from Starboard to port to ease with working with the line. Now the boat is almost in the...
-
Ddlochner replied to the thread Quick Question About SBO Site Access.Also clear the browser caches.
-
fred1diver replied to the thread DIY Bowsprit Anchor Hanger made of ROPE? Danforth Anchor.On our j be oat we have something like the pic with 2 types on it, we have the left side type. It works very well and I believe it’s not...
