All Activity
-
RAhoy fellow Hunter sailors, I need to replace the roller furling on my 1979 Hunter 30. I am curious on what people consider the best...
-
Ccaptcoho reacted to Davidasailor26's post in the thread Bottom paint - 2 coats or 3? Or even 4? 5? Why not 6? with
Like.
If more coats yielded better performance you’d probably see paint manufacturers recommending that. They’re certainly not incentivized to... -
Ccaptcoho reacted to Winging It!'s post in the thread Can someone tell me what the fiberglass bump/roll is on port/aft bilge area of C 22? with Like.
That is the liner. The bump keeps your stuff from sliding into the deep unknown.
-
Ralph Johnstone replied to the thread Replacing Prop Shaft for 84 Hunter 31.Hi Dario, Of course, numerous questions here. I see you had a two blade prop and have now changed to a three bladed prop. My original... -
-
This is one of the reasons I now use knots and not splices. The other reason is so if the point of connection becomes worn, I loose less... -
-
They should try that on the fence around my apiary. 3.7 joules per ZAP! -Will
-
Connect the ends of the old and new halyard via a sewn whipping. It's an easy job but if you just use tape and the ends pull apart...
-
Epoxy paint works well on properly prepared steel or iron keels. We've been using it on a steel schooner. The iron needs to be... -
Ddlochner replied to the thread Epoxy Paint.Epoxy paint works well on properly prepared steel or iron keels. We've been using it on a steel schooner. The iron needs to be...
-
Good morning Has anyone ever used epoxy paint on the cast iron keel? Like pool paint? If the keel is prepped correctly, do you think it...
-
Ccolemj replied to the thread LUCKGRIB and developing ideas in Weather Forecasting for Passage making..I've been using the AI models AIGFS and AIECMWF and they have been performing better than all the others. They pick up weather systems...
-
Ccolemj replied to the thread Cabin AC unit on P42.Don't buy old technology A/C today, and definitely don't try to keep a 31yo system going with replacement parts unless they are simple...
-
sailcapt340 replied to the thread Mystery leak at aft cabin bulkhead.Sorry for any confusion I caused. “Tapped” was the wrong word in this case. If I am going to fill a hole I just associate drilling and... -
-
Davidasailor26 replied to the thread Express 35 quadrant stop.That pin is puzzling. We had an Edson quadrant on a previous boat. The pin was covered in rubber and mounted on the top of the quadrant...
